Hp laserjet error codes LIVE HELP
Hp laserjet printer error codes Free Tech Support877.755.5300
HP LASERJET 9000 MFP ERROR CODES & SOLUTIONS
HP LASERJET 9000 MFP ERROR CODE 30.1.09 SCAN FAILURE
EXPLANATION - The pickup roller home position sensor is not detecting the pickup
roller home position.
RECOMMENDED ACTION –
- Perform an ADF INPUT diagnostic in the diagnostics menu to verify that the pickup roller assembly is functioning correctly.
- Check for loose connections and broken, frayed, or pinched wire
- Reseat connector J112 on the SCB, connectors J701 and J703 on the ADF intermediate PCB, and connector J716 on the pickup roller home position detection sensor.
- Check the pickup roller home position detection sensor and the pickup roller assembly for disengagement or damage.
- Replace the scanner control board
Need Hp 9000 mfp Scanner Control Board Click Here
HP LASERJET 9000 MFP ERROR CODE 30.1.10 SCAN FAILURE
EXPLANATION - ADF Fan Error.
RECOMMENDED ACTION –
- With the MFP powered on, verify that the fan is not functioning.
- Check for loose connections and broken, frayed, or pinched wires.
- Reseat the fan connector at scanner control PCB location J109, and connector J156 on the ADF fan.
- Replace the ADF fan.
- Replace the SCB.
Need Hp 9000 mfp Scanner Control Board Click Here Need Hp ADF Fan Assembly Click Here
HP LASERJET 9000 MFP ERROR CODE 30.1.08 SCAN FAILURE
EXPLANATION - Flatbed motor failure
RECOMMENDED ACTION –
- Perform a flatbed motor diagnostic in the diagnostics menu to verify that the flatbed motor is functioning correctly.
- Check for loose connections and broken, frayed, or pinched wires.
- .Reseat the flatbed motor connector at the SCB location J108.
- Replace the flatbed motor.
NEED HP 9000 MFP FLATBED MOTOR CLICK HERE
HP LASERJET 9000 MFP ERROR CODE ADF PICK ERROR
EXPLANATION – Too many pages have been placed in the ADF or the pages are not correctly paced in the ADF feeder. The pickup roller might be dirty, damaged, or not installed correctly.
RECOMMENDED ACTION –
- Remove some of the pages and try the operation again. If necessary, open the ADF feeder and remove any jammed media, and then close the ADF feeder .
- Perform an ADF INPUT diagnostic in the diagnostics menu to verify that the pickup roller is functioning correctly.
- Pre form a WEIGHT SOLENOID diagnostic in the diagnostics menu to verify the the weight arm is functioning correctly.
- Verify that the pickup roller is clean and not damaged.
For further assistance please call our tech support line @ 877-755-5300
HP LASERJET ERROR CODE 13.XX PAPER JAM
What went wrong? jammed at the specified location (and possibly at other locations). If the message persists after all jams have been cleared, check sensors
How to fix it? All jam messages, 1st step. Remove jammed print media from the specified location. Check the entire paper path for other pieces of media in the path. 2. Open and close the top cover to clear the message. 3. Check sensors and flags in the paper path for proper operation. NEEED PART? CLICK HERE
HP LASERJET ERROR CODE 0 PAPER JAM
paper jam occurred.
HP LASER ERROR CODE 13.1 PAPER JAM OPEN INPUT TRAYS
What went wrong? Paper delay jam at paperfeed area
HP LASERJET ERROR CODE 13.10 PAPER JAM CHECK DUPLEXER
What went wrong? Jam at duplexer.
HP LASERJET ERROR CODE 13.14
What went wrong? For Laserjet 5si. This error is caused by a defective paper control PCA
HP LASERJET ERROR CODE 13.2 PAPER JAM OPEN INPUT TRAYS
Paper stopped jam at paper feed area
HP LASERJET ERROR CODE 13.20 PAPER JAM CHECK REAR DOOR
Media stopped in the paper path during power on
HP LASERJET ERROR CODE 13.21 DOOR OPEN JAM
The top cover was open while printing.
HP LASERJET ERROR CODE 13.21 DOOR OPEN JAM
The top cover was open while printing.
HP LASERJET ERROR CODE 13.5 PAPER JAM CHECK REAR DOOR
Paper delay jam at fuser
HP LASERJET ERROR CODE 13.6 PAPER JAM CHECK REAR DOOR
What went wrong? Paper stopped jam at fuser.
HP LASERJET ERROR CODE 13.99 PAPER JAM
What went wrong? Paper jam occured
